Product Overview

Cooling Tower Fill with PVC, CPVC and PP Options for Water Compatibility

Water conditions are an important consideration when selecting Cooling Tower Fill. This fill is available in 305mm and 610mm widths, with customizable length and thickness and three material options: PVC, CPVC, and PP. The range provides flexibility for cooling tower projects with different water and operating requirements.

305mm and 610mm Width Options

The two available widths allow the fill to be configured for different tower layouts and fill-section dimensions. Customers can select the appropriate width according to the existing tower structure or the requirements of a new cooling tower project.

19mm Pitch for Film Fill Applications

The fill is manufactured with a 19mm pitch, creating a consistent corrugated passage structure for film-fill applications. This configuration provides a practical fill surface for water distribution and airflow through the fill pack.

Material Selection Based on Water Conditions

The fill can be supplied in PVC, CPVC, or PP. Material selection can be considered alongside the characteristics of the circulating water, operating temperature, and overall cooling tower environment. Offering several material choices makes it easier to specify a fill that is compatible with the intended application.

Custom Dimensions for Existing Fill Systems

Length and thickness are customizable, which allows the fill to be produced according to the dimensions required by a particular cooling tower. This can be useful when replacing existing fill where the original dimensions need to be maintained.

Designed Around Fill and Water Compatibility

Choosing cooling tower fill is not only a matter of selecting dimensions. The fill material should also be considered in relation to the water environment in which it will operate. With PVC, CPVC, and PP options, this product provides customers with greater flexibility when matching fill material to project requirements.

For projects with specific water conditions, dimensions, or material requirements, the fill specification can be confirmed before production to provide a suitable Cooling Tower Fill configuration.