Product Overview

1010mm × 2500mm Cross Flow Cooling Tower Fill for Water Quality Applications

Choosing the right cooling tower fill requires more than matching the tower dimensions. Cooling water temperature, chemical conditions, and water quality can also affect the suitable fill material and long-term operation.

1010mm × 2500mm Configuration

This Cross Flow Cooling Tower Fill is supplied at 1010mm width and 2500mm length, with customizable thickness for different cooling tower layouts.

Product Specifications

• Width: 1010mm
• Length: 2500mm
• Thickness: Customizable
• Pitch: 18mm
• Angle: 5.5°
• Material: PVC, CPVC, PP

Material Selection Should Follow Water Conditions

PVC, CPVC, and PP are available for different cooling water environments. PVC is commonly used for conventional applications, while CPVC and PP can be considered when temperature or chemical conditions require different material characteristics.

What Water Conditions Should Be Checked?

Before selecting the fill material, it is useful to review water temperature, pH, suspended solids, scaling tendency, chemical concentration, and water treatment conditions. These factors can influence fouling, scaling, and the service condition of the fill.

Correct Fill Selection Starts With the Water

For industrial cooling systems, reclaimed water, or chemically demanding applications, selecting a fill based only on size can lead to an unsuitable solution.

Our team can review your water analysis together with the tower design and operating conditions to help select the appropriate cooling tower fill material and configuration.

Related Cooling Tower Products

PVC Cooling Tower Fill |PP Cooling Tower Fill |Splash Grid Fill |Counterflow Film Fill

Send us your water quality data and cooling tower requirements for a suitable fill recommendation.